Содержание
Non-obvious things to note
One important thing to realise is that we are NOT running the latest version of worldedit — since it’s bukkit only (ugh!). So not all of the documentation is in fact accurate, and some of the listed commands don’t yet exist in our version. Having said that, the following are a few less well documented bits of worldedit that DO work on our version, that you, dear reader, may not know about:
- //set sign:4|Line1|Line2_Text|Line3 — create signs with prewritten text, and a specified orientation. Great for police cordons.
- //set crops:7 — damage (data) values!
- //replace dirt,cobble,glass 0 — lists!
- //set 5%stone,95%dirt — percentages! Set contents to a random distribution. You don’t have to use two, you can use three or more. And they don’t have to add up to 100%… not entirely sure how it handles it if you don’t, though.
- You can also do all the above with //replace, //fill and //fillr. Careful with the latter two, though!
- //replace can replace more than one block type at once, to save a lot of typing — i.e. //replace glass,wool stone
- //overlay <blocktype> — places one layer of blocktype on top of the highest block in the selection. May not always work. This unfortunately doesn’t work with percentages above. The trick — overlay first, then replace the overlay block type selectively!
Generation Commands¶
| Description | Generates a hollow cylinder. |
| Permissions | |
| Usage | |
| The pattern of blocks to generate | |
| The radii of the cylinder. 1st is N/S, 2nd is E/W | |
| The height of the cylinder |
| Description | Generates a cylinder. |
| Permissions | |
| Usage | |
| The pattern of blocks to generate | |
| The radii of the cylinder. 1st is N/S, 2nd is E/W | |
| The height of the cylinder | |
| Make a hollow cylinder |
| Description | Generates a hollow sphere. |
| Permissions | |
| Usage | |
| The pattern of blocks to generate | |
| The radii of the sphere. Order is N/S, U/D, E/W | |
| Raise the bottom of the sphere to the placement position |
| Description | Generates a filled sphere. |
| Permissions | |
| Usage | |
| The pattern of blocks to generate | |
| The radii of the sphere. Order is N/S, U/D, E/W | |
| Raise the bottom of the sphere to the placement position | |
| Make a hollow sphere |
| Description | Generate a forest |
| Permissions | |
| Usage | |
| The size of the forest, in blocks | |
| The type of forest | |
| The density of the forest, between 0 and 100 |
| Description | Generate pumpkin patches |
| Permissions | |
| Usage | |
| The size of the patch |
| Description | Generate a hollow pyramid |
| Permissions | |
| Usage | |
| The pattern of blocks to set | |
| The size of the pyramid |
| Description | Generate a filled pyramid |
| Permissions | |
| Usage | |
| The pattern of blocks to set | |
| The size of the pyramid | |
| Make a hollow pyramid |
(or , )
| Description |
Generates a shape according to a formula. See also https://tinyurl.com/weexpr. |
| Permissions | |
| Usage | |
| The pattern of blocks to set | |
| Expression to test block placement locations and set block type | |
| Generate a hollow shape | |
| Use the game’s coordinate origin | |
| Use the placement’s coordinate origin | |
| Use the selection’s center as origin |
Selection commands
- //pos1, //pos2 — set start and end positions at your feet.
- //hpos1, //hpos2 — set start and end positions at the block you’re looking at.
- //chunk — set the selection to your current chunk’s boundaries.
- //expand amount direction — expand your selection amount blocks in a given compass direction, i.e. «north», «up», «down», «e» etc.
- //contract amount direction — contract your selection amount blocks in a given compass direction (pulls in the side opposite the direction you specify, in that direction)
- //shift amount direction — shift the entire area of your selection amount blocks in a given compass direction.
- //sel cuboid|poly — switch selection between normal cuboid selection mode and polygonal mode, where you click once to start a polygon and subsequent right-clicks add vertices (in the horizontal plane).
There is also a helper script that allows selection by coordinates, which worldedit does not permit normally. You must have an area already selected for it to work:
/weselect x1 y1 z1 x2 y2 z2 — Select the specified area in worldedit.
Выбор региона для редактирования.
После установки мы можем запустить сервер, дабы испытать WorldEdit. Первым делом необходимо понять как редактируется территория — плагин дает возможность выбрать прямоугольник — «кубоид», отметив 2 точки на местности:
Делается это несколькими способами:
- Встав сначала на первой точке набираем в чат
- Второй способ подойдет для работы с большой дистанции — выбираем прицелом точки для кубоида и попеременно набираем в чате:
Ну и третий, самый распространенный способ — следует просто взять в руки нужный инструмент — деревянный топор. Его можно достать из меню креатива, либо при помощи одной полезной команды, которая является самой основной для этого плагина, а именно //wand. При помощи этого инструмента можно выделить нужную нам территорию. Правой кнопкой мыши вы выделяете одну точку, правой — другую. Кубоид образуется путем проведения диагонали от одной точки к другой. (К слову, это инструмент является неразделимым с другим плагином — WorldGuard, который разработан теми же разработчиками, что и Ворлд Эдит.) Итак, мы можем манипулировать с выделенной территорией. Давайте освоим самые базовые команды.
Utility Commands¶
| Description | Fill a hole |
| Permissions | |
| Usage | |
| The blocks to fill with | |
| The radius to fill in | |
| The depth to fill |
| Description | Fill a hole recursively |
| Permissions | |
| Usage | |
| The blocks to fill with | |
| The radius to fill in | |
| The depth to fill |
| Description | Drain a pool |
| Permissions | |
| Usage | |
| The radius to drain | |
| Also un-waterlog blocks |
(or )
| Description | Fix lava to be stationary |
| Permissions | |
| Usage | |
| The radius to fix in |
(or )
| Description | Fix water to be stationary |
| Permissions | |
| Usage | |
| The radius to fix in |
(or )
| Description | Remove blocks above your head. |
| Permissions | |
| Usage | |
| The apothem of the square to remove from | |
| The maximum height above you to remove from |
(or )
| Description | Remove blocks below you. |
| Permissions | |
| Usage | |
| The apothem of the square to remove from | |
| The maximum height below you to remove from |
(or )
| Description | Remove blocks near you. |
| Permissions | |
| Usage | |
| The mask of blocks to remove | |
| The radius of the square to remove from |
(or )
| Description | Replace nearby blocks |
| Permissions | |
| Usage | |
| The radius of the square to remove in | |
| The mask matching blocks to remove | |
| The pattern of blocks to replace with |
(or )
| Description | Simulates snow |
| Permissions | |
| Usage | |
| The radius of the cylinder to snow in | |
| The height of the cylinder to snow in | |
| Stack snow layers |
(or )
| Description | Thaws the area |
| Permissions | |
| Usage | |
| The radius of the cylinder to thaw in | |
| The height of the cylinder to thaw in |
(or )
| Description | Converts dirt to grass blocks in the area |
| Permissions | |
| Usage | |
| The radius of the cylinder to convert in | |
| The height of the cylinder to convert in | |
| Also convert coarse dirt |
(or , , , , )
| Description | Extinguish nearby fire |
| Permissions | |
| Usage | |
| The radius of the square to remove in |
| Description | Kill all or nearby mobs |
| Permissions | |
| Usage | |
| Radius to kill mobs in | |
| Also kill pets | |
| Also kill NPCs | |
| Also kill golems | |
| Also kill animals | |
| Also kill ambient mobs | |
| Also kill mobs with name tags | |
| Also kill all friendly mobs (Applies the flags -abgnpt) | |
| Also destroy armor stands | |
| Also kill water mobs |
(or , )
| Description | Remove all entities of a type |
| Permissions | |
| Usage | |
| The type of entity to remove | |
| The radius of the cuboid to remove from |
(or , , , )
| Description | Evaluate a mathematical expression |
| Permissions | |
| Usage | |
| Expression to evaluate |
| Description | Displays help for WorldEdit commands |
| Permissions | |
| Usage | |
| List sub-commands of the given command, if applicable | |
| The page to retrieve | |
| The command to retrieve help for |
General Commands¶
(or )
| Description | WorldEdit commands |
| Usage |
| Description | Displays help for WorldEdit commands |
| Permissions | |
| Usage | |
| List sub-commands of the given command, if applicable | |
| The page to retrieve | |
| The command to retrieve help for |
(or )
| Description | Get WorldEdit version |
| Usage |
| Description | Toggles trace hook |
| Usage | |
| The mode to set the trace hook to |
| Description | Reload configuration |
| Permissions | |
| Usage |
| Description | Complete CUI handshake (internal usage) |
| Usage |
| Description | Set your timezone for snapshots |
| Usage | |
| The timezone to set |
| Description | Writes a report on WorldEdit |
| Permissions | |
| Usage | |
| Pastebins the report |
(or )
| Description | Undoes the last action (from history) |
| Permissions | , |
| Usage | |
| Number of undoes to perform | |
| Undo this player’s operations |
(or )
| Description | Redoes the last action (from history) |
| Permissions | , |
| Usage | |
| Number of redoes to perform | |
| Redo this player’s operations |
(or )
| Description | Clear your history |
| Permissions | |
| Usage |
| Description | Modify block change limit |
| Permissions | |
| Usage | |
| The limit to set |
| Description | Modify evaluation timeout time. |
| Permissions | |
| Usage | |
| The timeout time to set |
Warning
This command is deprecated. //fast duplicates //perf and will be removed in WorldEdit 8.
Please use instead.
| Description | Toggle fast mode |
| Permissions | |
| Usage | |
| The new fast mode state |
| Description |
Toggle side effects for performance Note that this command is GOING to change in the future. Do not depend on the exact format of this command yet. |
| Permissions | |
| Usage | |
| The side effect | |
| The new side effect state | |
| Show the info box |
| Description | Sets the reorder mode of WorldEdit |
| Permissions | |
| Usage | |
| The reorder mode |
| Description | Toggle drawing the current selection |
| Permissions | |
| Usage | |
| The new draw selection state |
| Description | Sets the world override |
| Permissions | |
| Usage | |
| The world override |
| Description |
Changes watchdog hook state. This is dependent on platform implementation. Not all platforms support watchdog hooks, or contain a watchdog. |
| Permissions | |
| Usage | |
| The mode to set the watchdog hook to |
(or )
| Description | Set the global mask |
| Permissions | |
| Usage | |
| The mask to set |
(or )
| Description | Switch between your position and pos1 for placement |
| Usage |
Damage limitation
Block limits
By default, WorldEdit is configured to stop after 1000 modified blocks — this is to prevent any large-scale accidents.
The user is encouraged to change this limit to fit the job they are undertaking at the time, for example:
- //limit 20 — for copying and pasting a streetlight;
- //limit 500 — for demolishing a small house;
- //limit 5000 — for draining a large lake;
- //limit -1 — for destroying the universe (seriously, don’t be lazy — set an appropriate limit instead)
Radius limits
There is no radius limit command, so unfortunately nothing can guard you against making a typo with a command radius. Please ensure you don’t. Generally there is no situation where any worldedit command should be executed with a radius of over 100 — in fact most results can be achieved much more safely and with less lag for the clients by a series of much smaller commands.
Tools
Superpick
- // Turns SuperPick mode on/off
- /sp single Clears the target block with one hit
- /sp area <radius> Clears all blocks of the type hit in a diameter of 2 * radius + 1 (Radius 1 == 3x3x3, etc.)
- /sp recur <radius> Clears all blocks of the type hit which are connected in a diameter of 2 * radius + 1
- /sp shaped <fwd> <back> <left> <right> <up> <down> Clears all blocks of the type hit in a user-defined shape. Shape stays relative to the player’s facing direction. Values are 0-9 and expand the selection beyond the hit block for those directions. NEW
- /sp blast <fwd> <back> <left> <right> <up> <down> Clears /all/ blocks except bedrock in the user-defined shape. NEW
Tree
- /tool tree Binds to tool selected in hotbar, plants a tree when used (non functional in latest Crow builds, returns that tree cannot go there)
- /tool tree birch Plants a birch tree when used (non functional in latest Crow builds)
- /tool tree pine Plants a pine tree when used (non functional in latest Crow builds)
- /tool tree bigtree Plants a big tree when used
Super-pickaxes¶
Super-pickaxes are slightly different than other tools. Instead of being bound to a single item, they are just toggled on or off with their commands. When on, left-clicking with any pickaxe in your hand will trigger the superpick. Unlike normal tools, they are toggled off with .
Single Superpick
// /sp single
This super-pickaxe allows you to instantly break blocks. That may seem redundant, but it predates creative mode (creative mode was removed before alpha and wasn’t re-added until Beta 1.8). It also will drop the blocks you break as items (configurably), which creative mode does not do.
Area Superpick
/sp area <radius>
This super-pickaxe will break all blocks matching the same type as the initially clicked block within the radius. Like the single mode superpick, it can be configured to drop items.
Brush Commands¶
(or , , )
| Description | Brushing commands |
| Usage |
| Description | Forest brush, creates a forest in the area |
| Permissions | |
| Usage | |
| The shape of the region | |
| The size of the brush | |
| The density of the brush | |
| The type of tree to use |
(or )
| Description | Butcher brush, kills mobs within a radius |
| Permissions | |
| Usage | |
| Radius to kill mobs in | |
| Also kill pets | |
| Also kill NPCs | |
| Also kill golems | |
| Also kill animals | |
| Also kill ambient mobs | |
| Also kill mobs with name tags | |
| Also kill all friendly mobs (Applies the flags -abgnpt) | |
| Also destroy armor stands | |
| Also kill water mobs |
| Description | Paint brush, apply a function to a surface |
| Permissions | |
| Usage | |
| The shape of the region | |
| The size of the brush | |
| The density of the brush |
(or )
| Description | Unbind a bound brush from your current item |
| Usage |
(or )
| Description | Choose the clipboard brush |
| Permissions | |
| Usage | |
| Don’t paste air from the clipboard | |
| Paste starting at the target location, instead of centering on it | |
| Paste entities if available | |
| Paste biomes if available | |
| Skip blocks matching this mask in the clipboard |
(or )
| Description | Gravity brush, simulates the effect of gravity |
| Permissions | |
| Usage | |
| The radius to apply gravity in | |
| Affect blocks between the given height, upwards and downwards, rather than the target location Y + radius |
| Description | Heightmap brush, raises or lowers terrain using an image heightmap |
| Permissions | |
| Usage | |
| The name of the image | |
| The size of the brush | |
| The intensity of the brush | |
| Erase blocks instead of filling them | |
| Don’t change blocks above the selected height | |
| Randomizes the brush’s height slightly. |
(or )
| Description | Shortcut fire extinguisher brush |
| Permissions | |
| Usage | |
| The radius to extinguish |
(or )
| Description | Choose the sphere brush |
| Permissions | |
| Usage | |
| The pattern of blocks to set | |
| The radius of the sphere | |
| Create hollow spheres instead |
| Description | Raise brush, raise all blocks by one |
| Permissions | |
| Usage | |
| The shape of the region | |
| The size of the brush |
| Description |
Choose the terrain softener brush Example: ‘/brush smooth 2 4 grass_block,dirt,stone’ |
| Permissions | |
| Usage | |
| The radius to sample for softening | |
| The number of iterations to perform | |
| The mask of blocks to use for the heightmap |
(or , )
| Description | Choose the cylinder brush |
| Permissions | |
| Usage | |
| The pattern of blocks to set | |
| The radius of the cylinder | |
| The height of the cylinder | |
| Create hollow cylinders instead |
| Description | Set brush, sets all blocks in the area |
| Permissions | |
| Usage | |
| The shape of the region | |
| The size of the brush | |
| The pattern of blocks to set |
| Description | Apply brush, apply a function to every block |
| Permissions | |
| Usage | |
| The shape of the region | |
| The size of the brush |
| Description | Deform brush, applies an expression to an area |
| Permissions | |
| Usage | |
| The shape of the region | |
| The size of the brush | |
| Expression to apply | |
| Use the game’s coordinate origin | |
| Use the placement position as the origin |
| Description | Lower brush, lower all blocks by one |
| Permissions | |
| Usage | |
| The shape of the region | |
| The size of the brush |
| Description | Snow brush, sets snow in the area |
| Permissions | |
| Usage | |
| The shape of the region | |
| The size of the brush | |
| Whether to stack snow |
Selection Commands¶
| Description | Set position 1 |
| Permissions | |
| Usage | |
| Coordinates to set position 1 to |
| Description | Set position 2 |
| Permissions | |
| Usage | |
| Coordinates to set position 2 to |
| Description | Set position 1 to targeted block |
| Permissions | |
| Usage |
| Description | Set position 2 to targeted block |
| Permissions | |
| Usage |
| Description |
Set the selection to your current chunk. This command selects 256-block-tall areas, |
| Permissions | |
| Usage | |
| The chunk to select | |
| Expand your selection to encompass all chunks that are part of it | |
| Use chunk coordinates instead of block coordinates |
| Description | Get the wand object |
| Permissions | |
| Usage | |
| Get a navigation wand |
| Description | Remind the user that the wand is now a tool and can be unbound with /tool none. |
| Permissions | |
| Usage |
| Description | Contract the selection area |
| Permissions | |
| Usage | |
| Amount to contract the selection by | |
| Amount to contract the selection by in the other direction | |
| Direction to contract |
| Description | Shift the selection area |
| Permissions | |
| Usage | |
| Amount to shift the selection by | |
| Direction to contract |
| Description | Outset the selection area |
| Permissions | |
| Usage | |
| Amount to expand the selection by in all directions | |
| Only expand horizontally | |
| Only expand vertically |
| Description | Inset the selection area |
| Permissions | |
| Usage | |
| Amount to contract the selection by in all directions | |
| Only contract horizontally | |
| Only contract vertically |
| Description | Get information about the selection |
| Permissions | |
| Usage | |
| Get clipboard info instead |
| Description | Counts the number of blocks matching a mask |
| Permissions | |
| Usage | |
| The mask of blocks to match |
| Description | Get the distribution of blocks in the selection |
| Permissions | |
| Usage | |
| Get the distribution of the clipboard instead | |
| Separate blocks by state | |
| Gets page from a previous distribution. |
(or , , )
| Description | Choose a region selector |
| Usage | |
| Selector to switch to | |
| Set default selector |
| Description | Expand the selection area |
| Permissions | |
| Usage | |
| Amount to expand the selection by, can be vert to expand to the whole vertical column | |
| Amount to expand the selection by in the other direction | |
| Direction to expand |
Schematic and Clipboard Commands¶
(or , , )
| Description | Schematic commands for saving/loading areas |
| Permissions | , , , , , , |
| Usage |
(or , )
| Description |
List saved schematics Note: Format is not fully verified until loading. |
| Permissions | |
| Usage | |
| Page to view. | |
| Sort by date, oldest first | |
| Sort by date, newest first |
(or , )
| Description | List available formats |
| Permissions | |
| Usage |
| Description | Load a schematic into your clipboard |
| Permissions | , |
| Usage | |
| File name. | |
| Format name. |
(or )
| Description | Delete a saved schematic |
| Permissions | |
| Usage | |
| File name. |
| Description | Save a schematic into your clipboard |
| Permissions | , |
| Usage | |
| File name. | |
| Format name. | |
| Overwrite an existing file. |
| Description | Copy the selection to the clipboard |
| Permissions | |
| Usage | |
| Also copy entities | |
| Also copy biomes | |
| Set the include mask, non-matching blocks become air |
| Description | Cut the selection to the clipboard |
| Permissions | |
| Usage | |
| Pattern to leave in place of the selection | |
| Also cut entities | |
| Also copy biomes, source biomes are unaffected | |
| Set the exclude mask, non-matching blocks become air |
| Description | Paste the clipboard’s contents |
| Permissions | |
| Usage | |
| Skip air blocks | |
| Paste at the original position | |
| Select the region after pasting | |
| No paste, select only. (Implies -s) | |
| Paste entities if available | |
| Paste biomes if available | |
| Only paste blocks matching this mask |
| Description |
Rotate the contents of the clipboard Non-destructively rotate the contents of the clipboard. |
| Permissions | |
| Usage | |
| Amount to rotate on the y-axis | |
| Amount to rotate on the x-axis | |
| Amount to rotate on the z-axis |
| Description | Flip the contents of the clipboard across the origin |
| Permissions | |
| Usage | |
| The direction to flip, defaults to look direction. |
Undo
The //undo command is not to be relied upon. Use this in emergencies only — but don’t get into the habit of breaking things and fixing them with undo. It will often break signs, ruin redstone circuitry, break torches, and do terrible things to Craftbook and LionsMod sign-driven systems.
Also, do not confuse Worldedit’s //undo with Cuboid’s /undo! Both can be used for each of the plugins independently, and the two can be used together for some excellent effects. However, you stand a chance of accidentally undoing a previous repair from halfway round the world, and Cuboid cannot always manage /redo.
Installation Step-by-step¶
Bukkit / Spigot / Paper
Once you’ve set up your Bukkit-based server (instructions can be found on the respective Paper/Spigot sites), download WorldEdit from the Bukkit dev site. Make sure you get the right WorldEdit download for your Minecraft version.
- In your server folder, create a “plugins” folder if one does not yet exist. (It should be created when you first run the server).
- Move the WorldEdit .jar file into the plugins folder.
- Start your server.
Check your server log for errors. If you encounter errors, see the FAQ page.
Forge Single-Player
First, you’ll have to install Minecraft Forge. There are many third-party launchers designed to easily install modpacks. If you’re using one of those, you can add WorldEdit as a mod through the launcher interface. Otherwise, Forge will install a profile available through the official Minecraft Launcher. After installing Forge one way or the other, download WorldEdit from the CurseForge site. Make sure you get the right WorldEdit download for your Minecraft version and platform (Fabric builds are also there — make sure you grab the right one).
- If you’ve installed Forge as a profile in the official Minecraft launcher, follow Mojang’s instructions for finding where your “.minecraft” folder is. If you’re using a third-party launcher, this might be in a different location (consult the launcher’s docs).
- Create a “mods” folder inside the “.minecraft” folder if it doesn’t yet exist (it should be created if you’ve run Forge once already).
- Place the WorldEdit .jar file inside the mods folder. Start Forge from your launcher. WorldEdit should show up in the mods list.
If you encounter any errors, see the FAQ page.
Fabric Single-Player or Server
First, you’ll have to install Fabric. They have instructions on their website depending on how you’d like to install. The MultiMC instructions are recommended for single-player.
Then, download WorldEdit from the CurseForge site. Make sure you get the right WorldEdit download for your Minecraft version and platform (Forge builds are also there — make sure you grab the right one).
On Minecraft 1.14.x versions, you will also need to install the Fabric API mod. This is not required for 1.15+.
Add the WorldEdit .jar to the “loader mods” section of your MultiMC instance and check to enable it, or add the jar to your mods folder (see Forge instructions above) if you’re installing in the official Mojang launcher.
Forge Server / Sponge
First, you’ll have to install your server software of choice. For Forge, you can download the installer and run from a terminal or command prompt (search online for more comprehensive instructions). Sponge has documentation on setting up a server. After installing your server software, download WorldEdit from Curseforge, if using Forge or Ore, if using Sponge. If you are using SpongeForge, either version of WorldEdit will work (but don’t use both) — the Forge version may perform better in some cases.
- Create a “mods” folder if it doesn’t exist (it will be created automatically after running the server once).
- Add the WorldEdit .jar file to the mods folder.
- Start the server.
Check your server log for errors. If you encounter errors, see the FAQ page.
Want to see selection lines?
To see lines showing your selection, you can either:
- Access a limited version of the selection outlines server-side via the command. It works only for cuboid selections that are not larger than 48x48x48 (or 32x32x32 on older versions), and you have to be in creative mode. These limitations are due to how structure blocks have worked in Minecraft for a long time.
- Use a third party client-side mod, e.g. WorldEdit CUI (Fabric). Note that this mod requires Fabric, so you will have to install it at first.
Note
If you would like to use an older version of Minecraft (1.12 or earlier), in addition to downloading an older WorldEdit (version 6), you may also need the old WorldEditCUI mod by Mumfrey. Note that this mod requires LiteLoader (installation instructions on that page) instead.
Region Commands¶
| Description | Sets all the blocks in the region |
| Permissions | |
| Usage | |
| The pattern of blocks to set |
| Description |
Draws line segments between cuboid selection corners or convex polyhedral selection vertices Can only be used with a cuboid selection or a convex polyhedral selection |
| Permissions | |
| Usage | |
| The pattern of blocks to place | |
| The thickness of the line | |
| Generate only a shell |
| Description |
Draws a spline through selected points Can only be used with a convex polyhedral selection |
| Permissions | |
| Usage | |
| The pattern of blocks to place | |
| The thickness of the curve | |
| Generate only a shell |
(or , )
| Description | Replace all blocks in the selection with another |
| Permissions | |
| Usage | |
| The mask representing blocks to replace | |
| The pattern of blocks to replace with |
| Description | Set a block on top of blocks in the region |
| Permissions | |
| Usage | |
| The pattern of blocks to overlay |
(or )
| Description | Set the center block(s) |
| Permissions | |
| Usage | |
| The pattern of blocks to set |
| Description | 3 layers of dirt on top then rock below |
| Permissions | |
| Usage |
| Description | Build the four sides of the selection |
| Permissions | |
| Usage | |
| The pattern of blocks to set |
(or )
| Description | Build the walls, ceiling, and floor of a selection |
| Permissions | |
| Usage | |
| The pattern of blocks to set |
| Description |
Smooth the elevation in the selection Example: ‘//smooth 1 grass_block,dirt,stone’ would only smooth natural surface terrain. |
| Permissions | |
| Usage | |
| # of iterations to perform | |
| The mask of blocks to use as the height map |
| Description | Move the contents of the selection |
| Permissions | |
| Usage | |
| number of times to apply the offset | |
| The offset to move | |
| The pattern of blocks to leave | |
| Shift the selection to the target location | |
| Ignore air blocks | |
| Also copy entities | |
| Also copy biomes | |
| Set the include mask, non-matching blocks become air |
| Description | Repeat the contents of the selection |
| Permissions | |
| Usage | |
| # of copies to stack | |
| How far to move the contents each stack | |
| Shift the selection to the last stacked copy | |
| Ignore air blocks | |
| Also copy entities | |
| Also copy biomes | |
| Use block units | |
| Set the include mask, non-matching blocks become air |
| Description | Regenerates the contents of the selection |
| Permissions | |
| Usage | |
| The seed to regenerate with, otherwise uses world seed | |
| Regenerate biomes as well |
| Description |
Deforms a selected region with an expression The expression is executed for each block and is expected |
| Permissions | |
| Usage | |
| The expression to use | |
| Use the game’s coordinate origin | |
| Use the placement’s coordinate origin | |
| Use the selection’s center as origin |
| Description |
Hollows out the object contained in this selection Thickness is measured in manhattan distance. |
| Permissions | |
| Usage | |
| Thickness of the shell to leave | |
| The pattern of blocks to replace the hollowed area with |
| Description | Make a forest within the region |
| Permissions | |
| Usage | |
| The type of tree to place | |
| The density of the forest |
Скачать WorldEdit
https://mods-minecraft.ru/index.php?do=download&id=14438 (5.38 Mb, 30-07-2021, 16:56)
https://mods-minecraft.ru/index.php?do=download&id=14439 (4.35 Mb, 30-07-2021, 16:58)
https://mods-minecraft.ru/index.php?do=download&id=13195 (4.11 Mb, 17-01-2021, 14:12)
https://mods-minecraft.ru/index.php?do=download&id=13196 (4 Mb, 17-01-2021, 14:12)
https://mods-minecraft.ru/index.php?do=download&id=13193 (4.1 Mb, 17-01-2021, 14:12)
https://mods-minecraft.ru/index.php?do=download&id=13194 (3.98 Mb, 17-01-2021, 14:12)
https://mods-minecraft.ru/index.php?do=download&id=13191 (4.07 Mb, 17-01-2021, 14:12)
https://mods-minecraft.ru/index.php?do=download&id=13192 (3.96 Mb, 17-01-2021, 14:12)
https://mods-minecraft.ru/index.php?do=download&id=13197 (4.32 Mb, 17-01-2021, 14:14)
https://mods-minecraft.ru/index.php?do=download&id=13198 (70.46 Kb, 17-01-2021, 14:14)
https://mods-minecraft.ru/index.php?do=download&id=11632 (4.13 Mb, 5-08-2020, 11:14)
https://mods-minecraft.ru/index.php?do=download&id=11631 (3.92 Mb, 5-08-2020, 11:14)
https://mods-minecraft.ru/index.php?do=download&id=11630 (4.1 Mb, 5-08-2020, 11:13)
https://mods-minecraft.ru/index.php?do=download&id=9193 (3.51 Mb, 24-01-2020, 10:53)
https://mods-minecraft.ru/index.php?do=download&id=9192 (3.26 Mb, 24-01-2020, 10:53)
https://mods-minecraft.ru/index.php?do=download&id=6417 (2.02 Mb, 23-07-2019, 14:18)
https://mods-minecraft.ru/index.php?do=download&id=5758 (2.09 Mb, 16-06-2019, 12:34)
https://mods-minecraft.ru/index.php?do=download&id=2835 (1.41 Mb, 31-01-2019, 13:26)
https://mods-minecraft.ru/index.php?do=download&id=2836 (1.4 Mb, 31-01-2019, 13:26)
https://mods-minecraft.ru/index.php?do=download&id=2834 (1.4 Mb, 31-01-2019, 13:26)
https://mods-minecraft.ru/index.php?do=download&id=2833 (1.4 Mb, 31-01-2019, 13:25)
https://mods-minecraft.ru/index.php?do=download&id=2831 (1.39 Mb, 31-01-2019, 13:25)
https://mods-minecraft.ru/index.php?do=download&id=2832 (1.38 Mb, 31-01-2019, 13:25)
https://mods-minecraft.ru/index.php?do=download&id=2829 (1.38 Mb, 31-01-2019, 13:24)
https://mods-minecraft.ru/index.php?do=download&id=2830 (1.29 Mb, 31-01-2019, 13:24)
https://mods-minecraft.ru/index.php?do=download&id=2828 (1.39 Mb, 31-01-2019, 13:24)
https://mods-minecraft.ru/index.php?do=download&id=2827 (1.23 Mb, 31-01-2019, 13:24)
Эта тема закрыта для публикации ответов.