Ambient sounds 1.12.2

Underwater ambience

Underwater ambience plays when the player’s head is underwater. There are currently 22 different underwater ambient noises in total. They can be heard within a body of water of any size in any dimension.

Underwater ambience is divided into two groups: «Loop» and «Loop Additions». Both of these play independently of each other when the player is underwater. Additionally, «Loop Additions» are divided into three more groups: Rare and Ultra Rare. The rarity of both is exaggerated in their name, and are actually derivd from their in-game code names.

The codename for underwater ambience is

Note: The sounds are very quiet, so if you can’t hear it it’s not audio error.

Cave ambience[]

Cave ambience (also known as cave sounds, or eerie noises according to the subtitles) are sounds that occasionally play when the player is underground or in a dark area, based on the .

Cave ambience sounds can play in all biomes except the Nether biomes, as long as there is a cave or a dark enough area present.

The code name for cave ambience is . There are 19 different cave ambience sounds in total.

Flags

 Bug: This flag is broken at engine level for Soundscripts. It will only work when a sound is played with its raw filename.

16: Start Silent

The map will start without this sound playing. Enabled by default.
 Bug: Looping sounds that do not start silent cannot be controlled!

32: Is NOT Looped

Changes how the handles stopping and starting playback. It won’t stop a sound that loops from looping, but it is still very important to set it to the right value. You might not be able to stop and/or start the sound if it isn’t!
 Bug: Having this option ticked while using a looped sound WILL prevent you from controlling it!

Listening to ambient sound during music playback (Ambient Sound Mode)

You can hear ambient sound through the microphones embedded in the left and right units of the headset while enjoying music.

Press the CUSTOM button while the noise canceling function is on.

To change the setting of the Ambient Sound Mode

You can change the settings of the Ambient Sound Mode by connecting the smartphone (with the “Sony | Headphones Connect” app installed) and the headset via Bluetooth connection.

Voice focus: Unwanted noise will be suppressed while announcements or people’s voices are picked up, allowing you to hear them as you listen to music.

To turn off the Ambient Sound Mode

Press the CUSTOM button repeatedly until the Ambient Sound Mode is turned off.

Each time the button is pressed, the function switches as follows and is announced by the voice guidance.

The noise canceling function: OFF/The Ambient Sound Mode: OFF

The noise canceling function: ON

The Ambient Sound Mode: ON

Hint

Ambient Sound Mode settings changed with the “Sony | Headphones Connect” app are stored in the headset. You can enjoy music with the stored settings of the Ambient Sound Mode even when the headset is connected to other devices which do not have the “Sony | Headphones Connect” app installed.

Note

• Depending on the ambient condition and the type/volume of audio playback, the ambient sound may not be heard even when using the Ambient Sound Mode. Do not use the headset in places where it would be dangerous if you are unable to hear ambient sounds such as on a road with car and bicycle traffic.
• If the headset is not worn properly, the Ambient Sound Mode may not work correctly. Wear the headset properly.

• If the CUSTOM button is set as the Google Assistant button, the noise canceling function and Ambient Sound Mode cannot be switched from the headset. In this case, you can change the settings of the noise canceling function and Ambient Sound Mode with the “Sony | Headphones Connect” app.

• If the CUSTOM button is set as the Amazon Alexa button, the noise canceling function and Ambient Sound Mode cannot be switched from the headset. In this case, you can change the settings of the noise canceling function and Ambient Sound Mode with the “Sony | Headphones Connect” app.

• Depending on the surrounding environment, wind noise may increase when the Ambient Sound Mode is turned on. In that case, cancel the voice focus with the “Sony | Headphones Connect” app. If the wind noise is still significant, turn off the Ambient Sound Mode.

Inputs

Pitch

Sets the sound pitch, expressed as a range from 1 to 255, where 100 is the sound’s original pitch.
 Bug: Pitch will play the sound without informing the rest of the entity. This makes looping sounds unstoppable!.

Starts the sound.

Stops a looping sound. Does not stop a non-looping sound: this is intentional, and can be changed with C++. However, a non-looping sound can be stopped by using the Volume input with a value of 0.

Toggles a looping sound between playing and stopped. Behaves like if the sound is unlooped.

Plays the sound at a volume from 0 to 10, where 10 is the loudest.
 Bug: Volume will play the sound without informing the rest of the entity. This makes looping sounds unstoppable! It is speculated that the input is supposed to change the volume at which the ambient_generic plays its sound when prompted by other inputs, not play it by itself.

 Bug: Setting the volume to 0 will cause the sound to pause, rather than play silently.

Fades the sound up to full volume over a specified number of seconds, with a range from 0 to 100 seconds.
 Bug: Non-functional.

Fades the sound to silence over a specified number of seconds, with a range from 0 to 100 seconds.
 Bug: Will bring the sound up to full volume (i.e. 10) before beginning to fade it.

Base:

Adds to the entity’s list of response contexts. Format is .

Assigns a new keyvalue/output on this entity. For keyvalues, some rely on extra necessary code to be ran and won’t work if its simply just changed through this input. There is a strict format that must be followed:

Syntax: 

// Format of changing KeyValues "AddOutput  "
//// Raw text
"OnUser1" "!self,AddOutput,targetname new_name"

// Format of adding an Output "AddOutput {targetname}:{inputname}:{parameter}:{delay}:{max times to fire, -1 means infinite}"
//// Raw text
"OnUser1" "!self:SetParent:!activator:0.0:-1"
// Arguments can be left blank, but the empty blank should still be contained.
//// Raw text
"OnUser1" "!self:ClearParent::0.0:-1"

Removes all contexts from this entity’s list.

Removes this entity from the the movement hierarchy, leaving it free to move independently.

to

Fires the respectiveoutputs; see User Inputs and Outputs.

Removes this entity and any entities parented to it from the world.

Functions the same as , although this entity and any entities parented to it are killed on the same frame, being marginally faster thaninput.

Remove a context from this entity’s list. The name should match the key of an existing context.

Move with this entity. See Entity Hierarchy (parenting).

Change this entity to attach to a specific attachment point on its parent. The entity will teleport so that the position of its root bone matches that of the attachment. Entities must be parented before being sent this input.

As above, but without teleporting. The entity retains its position relative to the attachment at the time of the input being received.

 !FGD

Same as a player invoking +use; no effect in most cases.

 !FGD

Dispatches a response to the entity. See Response and Concept.

 (removed since ) !FGD

Dispatches a special effect from the entity’s origin; see also List of Client Effects. Replaced by the particle system since .

 (in all games since )

Execute a VScript file from disk, without file extension. The script contents are merged with the script scope of the receiving entity.

 (in all games since )

Execute a string of VScript source code in the scope of the entity receiving the input. String quotation may be needed when fired via console.
 Bug: In Hammer, using string arguments will corrupt the VMF file’s structure, making the file unviewable for the next Hammer session.

Fix: Remove the string argument manually with a text editor.

 (in all games since ) !FGD

Execute a VScript function in the scope of the receiving entity.

 (in all games since ) !FGD

Send this entity to a spot in the map. If the entity is parented to something, it will be offset from the parent by this amount.

 (in all games since ) !FGD

Set this entity’s angles.

Подводные звуки[]

В океане чаще всего слышатся подводные фоновые звуки.

Подводные фоновые звуки проигрываются, когда игрок полностью находится под водой. Всего существует 22 подводных фоновых звука.

Эти звуки можно услышать в водоёме любого размера и в любом измерении.

Подводные фоновые звуки делятся на 2 группы: «Loop» и «Loop Additions». Они проигрываются независимо друг от друга. Кроме того, группа «Loop Additions» делится еще на 3 подгруппы.

Название подводных фоновых звуков в коде игры — ambient.underwater. <название группы в коде игры>

Atmosfera — Mods — Minecraft — CurseForge

https://www.curseforge.com/minecraft/mc-mods/atmosfera

• The Atmosfera System
• The Atmosfera Resources
• Compatibility

1. The client-side environment allows users to run the mod even on Vanilla servers.
2. The system provides a dynamic 2D soundscape depending on several conditions and modifiers within a sphere/hemisphere around the player:
3. The playback uses smooth loops and transitions.
4. Settings powered by Cloth Config API for volumes and subtitles can be configured with or without M…

1. The client-side environment allows users to run the mod even on Vanilla servers.
2. The system provides a dynamic 2D soundscape depending on several conditions and modifiers within a sphere/hemisphere around the player:
3. The playback uses smooth loops and transitions.
4. Settings powered by Cloth Config API for volumes and subtitles can be configured with or without Mod Menu.

See moreNew content will be added above the current area of focus upon selection
See more on curseforge.com

Ambient Sounds Add-on 1.16 (Complete Overhaul …

https://mcpedl.com/ambient-sounds-add-on

Sep 14, 2019 · Ambient Sounds is an add-on that adds much-needed sound to Minecraft. All of these sounds are found naturally in the world and don’t require the player to manually play them. Additionally, everything should work in multiplayer. Version 3 is a complete overhaul of what it was before. Now, every biome and dimension has a custom soundscape to accompany it.

Explore further

Recommended to you based on what’s popular • Feedback

Trivia[]

Cave 14 viewed in a spectrogram.

• When «Cave 14» is viewed in a spectrogram, it appears to show the face of a creeper.
• Cave ambience is the only ambience that has subtitles.
• «Basalt Deltas click» is likely based on the sound a Geiger counter makes when in the presence of radiation, despite neither Geiger counters nor radiation existing in vanilla Minecraft.
• «Cave 1,5, and 13» can also be heard in lower pitches. The pitch can range from 0.65x to 1.00x.
• «Cave 5 and 13» also sound a little similar, but they are played with different speeds. Also the sound for «Cave 5» sounds like a low-ringing bell while «Cave 13» sounds like an intense brush of wind.
• Although the mood algorithm works in all vanilla dimensions since Java Edition 1.16, due to the mood system isn’t programmed properly for the End ambience sounds to be played in the End, so the Overworld cave ambience sounds could be played in the end instead.[verify]
• «Warped Forest Mood 9» is actually a slowed-down and reverberated idle sound of the witch.

Nether ambience

Nether ambience plays while the player is in The Nether. Each biome has its own unique ambience. There are 126 different nether ambient sounds in total.

Nether ambience is divided into three groups: «Loop», «Loop Additions», and «Mood», all of which play independently of each other while the player is in the Nether.

The codename for Nether ambience is

Ambient Sound Configuration

The ambient sound configuration screen, shown when first creating an ambient sound, or by double-clicking an existing sound.

Sound Type

Configure the type of sound emitted by this source. Ambient Sounds can either be local which are blocked by any Walls which inhibit perception or global which are always audible within their area regardless of the presence of Walls.

Audio Source

You must choose a path to a valid sound file which plays when Tokens are within the area of effect. Ambient Sounds always repeat on loop, so it is recommended to use a format like webm, wav, or ogg which allows for seamless looping, but other audio file formats are also supported.

X & Y Position

The x/y coordinates for the center of the Ambient Sound area of effect give the precise location of the emitter in a scene. All newly created sounds have these fields automatically filled in based on where in the scene the sound was created. Repositioning the sound in the scene also changes these values automatically.

Sound Radius

The radius of the area of effect for the Ambient Sound, expressed in distance units. For example, if your Scene is configured where each square represents 5ft.

Volume Easing

This option specifies that the volume of the Ambient Sound should automatically reduce as Tokens are further from its origin (but still within the area) and increase in volume when Tokens are closer to the origin of the sound. If this option is disabled, the volume level of the Ambient Sound will be the same everywhere within the affected area.

Maximum Volume

This slider configures the maximum volume level of the Ambient Sound at its point of origin (if easing is applied) or throughout the area (if no easing).

Darkness Activation Range

These fields configure the darkness levels in which the Ambient Sound plays. The default setting of between 0 and 1 results in a sound that is always playing.

Ambience – Minecraft Wiki

https://minecraft.fandom.com/wiki/Ambience

• Cave Ambience
• Underwater Ambience
• Nether Ambience
• Mood Algorithm
• Issues
• Trivia
• See Also

Cave ambience (also known as cave sounds, or eerie noises according to the subtitles) are sounds that occasionally play when the player is underground or in a dark area, based on the mood algorithm. Cave ambience sounds can play in all biomes except the Nether biomes, as long as there is a cave or a dark enough area present. The code name for cave ambience is ambient.cave. There are 19 different cave ambience sounds in total.

See more on minecraft.fandom.com

Underwater ambience[]

This feature is exclusive to Java Edition. 

Not to be confused with the sound produced by flowing water.

Underwater ambience plays while the player’s head is underwater. There are 22 different underwater ambience sounds in total.

They can be heard within a body of water of any size and in any dimension.

Underwater ambience is divided into two groups: «Loop» and «Loop Additions». Both of these play independently of each other while player is underwater. Additionally, «Loop Additions» are divided into 3 more groups.

Its code name is ambient.underwater.<group code name>

Note that Rare Loop Addition’s and Ultra Rare Loop Addition’s rarity is exaggerated in their name. Their names are derived from their in-game code names.

How to Add Your Own Sounds to Minecraft : 6 Steps …

https://www.instructables.com/How-to-Add-Your-Own-Sounds-to-Minecraft

• 1. Locate .minecraft and Create the Pack. First, we must navigate to the .minecraft folder, where all of …
  2. Pack.mcmeta. Open that folder you just made. Right-click inside the folder, select ‘new’, and then …
  3. Finding the Sound(s) You Want to Change. Go back to the .minecraft folder. Open the folder called …
  4. Creating the Sound. Now you need to obtain the sound that will replace the current sound. To do …
  5. Test the Sounds. Now to test the sounds. Open Minecraf t, hit play, and click options. Click the …
  6. Adding Pack.png. You may have noticed that in the earlier step, in one of the pictures, the other …

  See full list on instructables.com

Пещерные звуки[]

Тёмная пещера: здесь чаще всего слышатся фоновые пещерные звуки.

Пещерные фоновые звуки, или жуткий шум (согласно субтитрам), — это звуки, которые могут воспроизводиться, когда игрок находится в тёмной области или под землей. Всего существует 19 различных пещерных звуков.

Возникнуть пещерные звуки могут в любое время, в любом измерении, в любом свободном от блоков пространстве, при уровне освещения ниже 8. Звуки можно услышать, находясь в 10—20 блоках от источника звуков в любом направлении, при этом точка-источник может быть в непосредственной видимости игрока. Также условия для воспроизведения звуков можно воспроизвести, иными словами, определение допустимых точек-источников пещерных звуков основывается на текущей, а не изначальной, геометрии мира.

Проигрывание пещерных фоновых звуков зависит от уровня настроения. Настроение (от англ. mood) — это значение в процентах от 0 до 100. Когда игрок находится под землёй или в тёмном месте, уровень настроения увеличивается, а когда нет — наоборот, снижается. Если уровень настроения достигнет 100 %, проигрывается один из пещерных звуков, после чего значение настроения аннулируется и цикл повторяется заново. Настроение и его текущее значение можно увидеть на экране отладки.

Пещерные фоновые звуки можно найти по пути . В самой игре тон звука может меняться в некоторых пределах.

От: admin

Эта тема закрыта для публикации ответов.